If you want to be able to pass a Roadworthy Examination it helps to understand what the mechanic conducting the vehicle inspection will be considering when deciding if the car is roadworthy or not. The following checklist may help you to make sure your vehicle will be able to successfully pass a Roadworthy Inspection.

The following checklist may help you to make sure your vehicle will be able to successfully pass a Roadworthy Inspection.

Brakes and warning systems are an essential safety feature of all vehicles and must be in good working order to pass a roadworthy examination

All components must function correctly, be mounted securely and correctly located 

All brake components must be free from visible wear, distortion or damage 

Vehicle parking and emergency brakes must be functioning correctly 

Park brakes must be capable of keeping the vehicle stationary on any grade of hill 

Brake lights (warning signs) must be fitted correctly and functioning 

Brake linings must not be worn down to the wear indicators

To pass a Roadworthy Inspection a vehicle must have;

An absence of any condition able to cause structural failure or affect safe operation 

A sound floor, free of obstructions or any condition which could hamper safe operation 

Functioning mechanisms , inc doors, boots, Ute lids, bonnets, hatches & tailgates 

Bumper bars which eliminate sharp corners or protrusions must be securely fitted 

Towbars (when present) should be in good condition and correctly fitted 

Vehicles with a tray type body require suitable mudflaps for the vehicle type

To pass a Certificate of Roadworthiness examination, a car should be generally in a good condition.

All accessories should function correctly without impeding performance and must be suitable for the intended task.

Steering wheels should be suitable to the vehicle and any covers must be secure

Pedals & steering wheel/control knobs in working order (not hampering performance)

A suitable rear view mirror must give a clear view to the rear of the vehicle

An effective horn/warning device able to sustain a steady and constant pitch   

Vehicles built after 1 July 1988 need a functioning speedometer displaying speed in km/h  

Suitable Fuel caps must be in use, be adequately secure and seal correctly

(Plastic emergency or temporary fuel caps are not acceptable and will not pass inspection)

Lights, reflectors and signals - RWC checks

Light requirements vary greatly with vehicle type, but as a general rule all vehicles must be fitted with;

Headlights (Lights & Reflectors must be in good condition)  

Turn signal lamps (aka indicators or blinkers)  

All Lights must be in reasonable working order  

All lights must be correctly placed and securely fitted  

All lenses or light covers must be clean and free of damage   

All light covers and lenses need to be of the correct colour (not faded)

Seatbelts need to be present and free of damage or obstructions whilst being secure and structurally sound. All seats, partcularlt the drivers seat, must be in good condition and fitted securely to the vehicle.

Seatbelt webbing must be firmly secured  

Seatbelt must not display any cuts, damage, wear, knots or fraying  

All seats must be secure and structurally sound  

Seats may not have protrusions or jagged edges  

The drivers seat must not have any defect which could impede driving ability  

Seat sliders must be functioning correctly and free of any looseness  

If present head restraint must be secure and in a sound condition  

No seatbelt component can be modified in any way  

The vehicle must drive straight, without wandering or pulling left or right when driving straight ahead. All steering components must be securely and correctly mounted and free from damage or excessive wear, including dust and grease seals. 

Power steering fittings should be free of oil leaks  

Adequate clearance between suspension components and vehicle body  

All joints, pivots and bushes must be in good condition  

Dust and grease seals must be deemed as suitable  

All wheel bearings and mounts need to be in good condition  

Shock absorbers and struts must be securely mounted  

Shock & Struts must not display any sign of leaks  

Tyres and wheels play a crucial role in safety and a vehicles' ability to stop quickly and safely in an emergency situation.

To pass a Roadworthiness Examination your wheels and tyres need to be in good condition and free of any damage or wear which could cause failure of the rims, tyres or wheels or otherwise compromise vehicle safety.

Tyres must display a tread depth of 1.5mm (min) at any point on the tread reasonably expected to contact the road (other than at tyre tread indicators)  

Where tread wear indicators are present, tyres cannot display sufficient wear that such indicators contact the road surface  

Tyres and rims must be of compatible size  

In the case of retreaded tyres, the ID of the retreader must be clearly marked  

Retreaded tyres must display the word "retreaded" in addition to relevant markings as required by the Australian standard  

Wheels, rims and tyres must be free of cracks or any other damage that could cause failure of the tyre, wheel or rim  

The wheels and rims must cannot be out of balance or otherwise damaged, dented or buckled  

You cannot have a "temporary use" spare tyre fitted as a road wheel  

If you have spoke wheels, all spokes must be intact, straight, fitted and laced or tensioned correctly  

When facing straight ahead the wheels and tyres must not project beyond the width of the mudguards  

Tyres & Wheels must not contact any part of the vehicle during any combination of steering or suspension functions

Wheels must be have the correct type and number of studs, nuts (or both where required) and be securely fitted

All windows need to be free of damage and must not be altered to the extent that it hampers safe vehicle operation. Impairment of a drivers vision of the road as a result of significant cracks, chips or scratches may cause the car to fail a roadworthy test.

Minor wear and tear is sometimes deemed acceptable provided the drivers vision is not impacted. Windscreens with tinting included included during manufacture are acceptable. Tinting applied via coatings or tint films post manufacture is unacceptable.

To pass a Certificate of Roadworthiness vehicle windows should;

Be free of any cracks, chips, scratches or damage which compromises driver view or safe operation  

Have no alterations (including tinting) which might impact a drivers ability to see the road and other users at all times  

Have Correctly fitted and properly functioning windscreen wipers  

Include windscreen washer jets which are correctly positioned to effectively keep the windshield clear of rain, dirt or debris  

Not have a windscreen where the primary vision area is tinted to more than 70% (where manufactured after 1971)  

Not have a windshield which has tinting applied as a coat or tint film in the primary vision area 

Roadworthy Certificate Inspections must be performed only by a Licensed Vehicle Tester such Geoff Perry Motors in Ringwood. 

If you want to be able to pass a Roadworthy Examination it helps to understand what the mechanic conducting the vehicle inspection will be considering when deciding if the car is roadworthy or not. Read our RWC checklist...

Roadworthy Inspection Checklist

What you can check to help pass a Certificate of Roadworthiness

As your local Mechanic in Ringwood, Geoff Perry Motors take great pride in offering our clients the very best in car servicing and automotive repairs.

Conveniently located in Ringwood, Geoff Perry Motors specialise in car servicing for all makes and models, including commercial fleet vehicles.

Our fully qualified log book servicing ensures your car is in safe hands, and we provide quality car service and repairs on all models, including New Car Servicing, four wheel drive and Diesel vehicles.

Geoff Perry Motors in Ringwood are Licensed Vehicle Testers and are able to to issue Certificates of Roadworthiness. Bring your car in to our well equipped workshop or Book a Roadworthy Inspection Online

Need your air-conditioning serviced? We can arrange to have your car's air con regas, service and repair with a professional licensed technician who regularly comes to our workshop. We aim to be a one stop workshop.

We can also perform a range of car services including:

As a Repco Authorised Service centre, we have a commitment to high quality workmanship, ensuring the very best in automotive care. Our Business is a member of the Repco Auto Tech training program, ensuring each mechanic is kept fully up to date with modern vehicle repair methods.

So rest assured - your car is in safe hands.

For friendly service from a trusted independent, you can rely on the team at Geoff Perry Motors

As a Repco Authorised Service centre, we have a commitment to high quality workmanship, ensuring the very best in automotive care...

Automotive Servicing and Repairs in Ringwood

Wheel balancing should not be confused with wheel alignment (which refers to the direction all of the wheels face in relationship to each other and to the centre line of the wheel).

On a wheel that is perfectly balanced, every point on the wheel weighs the same, which minimises vibration and “Wheel Wobble”. Thus wheel balancing involves making sure that the distribution of weight is even around the entire circumference of the wheel.

If there is unequal distribution of weight it creates an unequal centrifugal force, manifesting in vibration, which varies with the wheel's rotational speed. If you have ever noticed a vibration through the steering wheel, or perhaps through the entire vehicle, that goes comes and goes at different speeds, you have probably experienced the effects of unbalanced wheels.

Wheels can be unbalanced in two planes; the rotational plane, which causes the wheel to bounce up and down, or the lateral plane, causing the wheel to move from side to side. Depending on the cause of the unequal weight distribution both conditions can usually be corrected by professional wheel balancing by your local Repco Authorised Service centre.

For professional wheel balancing services in Ringwood contact the experts at Geoff Perry Motors without delay...

On a wheel that is perfectly balanced, every point on the wheel weighs the same, which minimises vibration and “Wheel Wobble” ...

Essential Wheel Balancing Services in Ringwood

Unroadworthy tyres are unsafe, illegal and basically cost you money

The braking system cannot work to its maximum performance if the tyres are worn or otherwise unsuitable for the car or type of driving you undertake.

Geoff Perry Motors are the professionals in Ringwood when it comes to the supply, fitting, repair and maintenance of tyres for a range of vehicle types. You should have your tyres checked by a professional on a regular basis to ensure the safety, comfort and reliability of your vehicle in addition to the life span of your tyres.

If you are experiencing unusual vibrations, poor handling of the vehicle, have problems keeping tyres at the correct pressure, have low tyre tread or can see obvious damage to your tyres, you should probably have your tyres checked by experts such as the service team from Geoff Perry Motors.

New tyres, a wheel alignment and wheel balancing go hand in hand to ensure good handling and maximising the expected lifespan of your new tyres. Geoff Perry Motors are experts at inspecting and maintaining tyres and related components and can give you good advice on purchasing the correct tyres for your car.

So if you need new tyres, a wheel balance or wheel alignment or just a simple bit of wheel related advice, perhaps it is time to pop in to our Ringwood workshop for some expert advice.

High quality, good condition tyres are an important part of your vehicles safety. As their main role is keeping your car in contact with the road they play a vital role in the stopping power of your car. Geoff Perry Motors are tyre & wheel professionals…

Tyre Specialists - supply & fit - Ringwood

Log Book Servicing is a proactive approach to car maintenance where regular inspections and small fixes keep your vehicle running smoothly and efficiently to prevent small problems turning into major damage and issues which could otherwise be very costly to repair.

Every passenger car (and most commercials vehicles) should be issued with a “Log Book” by the manufacturer, which lays out the specified timing and agenda for your regular log book services. You should keep your log book in your glove box for reference and recording any details, but Geoff Perry Motors can also refer to our database to get the required information if you've misplaced your book.

The schedule of the service will be a combination of both time or distance.

You may be tempted to delay your next log book service because your car is probably still driveable and it may not have reached BOTH the time and distance measures. While you obviously need to find availability in your budget and schedule, don't delay too long because wear and tear on the car will increase exponentially and could lead to damage which is many times more expensive than the log book service would have been.

Every car is different and the agenda for each service changes according to the schedule, which is why each vehicle is issued with a log book. Below are some examples of what can be included:

Get more information in repco's auto facts videos:

For a qualified Log Book Service at a competitive price, contact us at Geoff Perry Motors using the Online Booking Form below. Geoff Perry Motors in Ringwood and can service car owners in the surrounding areas.

Log Book Servicing is essential car maintenance, where regular inspections and small fixes keep your vehicle running smoothly and efficiently to prevent small problems turning into major damage and costly repairs. Call Geoff Perry Motors to book in your next Service.

New Car Log Book Servicing in Ringwood

There should never be a rumbling, groan or grinding sound coming from the wheels of your car, nor any vibration through the steering wheel (unless of course you are driving over corrugated roads!).

Wheel bearings, if improperly sealed or insufficiently lubricated, can be prone to wear and tear. Such damaged bearings may lead to the detachment of the wheel, creating a hazardous situation. Additionally, they can cause the tyres to experience premature uneven wear, as well as producing a noisy, vibratory driving experience. For emergency repairs or regular maintenance, visit us in Ringwood for the following;

Geoff Perry Motors wheel bearing services include:

Repacking and adjustment of wheel bearings (where applicable)

Wheel bearing failure: symptoms and causes

The wheels on your vehicle need to operate in a smooth manner, regardless of surfaces and speeds. When there is damage to the wheel bearings, the drive is no longer smooth as friction will build up. This friction can then break down the wheel bearings and cause wear and tear on the axle.

Geoff Perry Motors can give you peace of mind by advising you what is causing the loud noise or vibration in your vehicle. It may be time to come in and see our mechanics if you are experiencing any of the following symptoms:

Damaged or leaking seal on the wheel bearings

Peace of mind: Not only are we a Repco Authorised Service Centre, but we have a combined 20 years of experience on our team. From large jobs to small, you know you are in good hands with our mechanics.

Expert Knowledge: As part of the Repco family, our mechanics are offered training seminars and received service bulletins about the latest diagnostic equipment and vehicle upgrades.

Friendly Service: We are not just a shop, but a locally owned and operated community of mechanics who are looking out for our neighbours.

For wheel bearing replacements and routine maintenance in and around Ringwood contact our team at Geoff Perry Motors.

There should never be a rumbling, groan or grinding sound coming from the wheels of your car, nor any vibration through the steering wheel - unless of course you are driving over corrugated roads. If there is you should be heading for Geoff Perry Motors in Ringwood...

Wheel Bearing Service and repair in Ringwood

We can supply a wide range of tyres for passenger vehicles, 4WD, Light Commercial, Off-Road Mud or All-Terrain tyres. 

Geoff Perry Motors are Tyre specialists in Ringwood just east of Melbourne.

We can also perform Wheel Alignments and Wheel Balancing and don't forget tyre rotation to extend the life of your tyres.

Your tyres are all there is between you and the open road. Punctures, damage, under inflation, low tread all have an impact on the safety of your vehicle. We will look after your tyres, so they will look after you.

Regular servicing will keep tabs on your tyre condition and is also a good opportunity to have wheel alignments and wheel balances performed. They are relatively low cost and can greatly improve your driving experience. 

New tyres, a wheel alignment and wheel balance go hand in hand to ensure good handling. Geoff Perry Motors are experienced at maintaining tyres and related components and can give you good advice on purchasing the correct tyres for your car.

Punctures, damage, under inflation, low tread all have an impact on the safety of your vehicle. We can supply a wide range of tyres for passenger vehicles, 4WD, Off-Road Mud or All-Terrain tyres. Let Geoff Perry Motors inspect, repair or replace your tyres to keep you safe on the road.

Tyres and Wheel Service in Ringwood

AAAA

VACC

We advise that our workshop will be closed for the Christmas period from the close of business on Sunday the 18th of December and reopening on Monday the 9th of January

We advise that our workshop will be closed for the Christmas period from the close of business on Thursday the 21st of December and reopening on Monday the 8th of January

We advise that we will be closed for the Easter long weekend from Friday 29th of March, reopening Tuesday 2nd of April

Geoff Perry Motors Pty Ltd take great pride in offering their clients personalised, and friendly service at all times. 
		
Conveniently located in Ringwood, the business is a member of the Repco Auto Tech training program, ensuring their technicians are kept fully up to date with modern vehicle repair methods. 
		
Geoff Perry Motors Pty Ltd have a wealth of experience in servicing all makes and models, including commercial fleet vehicles. As a Repco Authorised Service centre, they have a commitment to high quality workmanship, ensuring the very best in automotive care.

Geoff Perry Motors

Tyres and Wheel Service

Geoff Perry Motors are Tyre specialists in Ringwood just east of Melbourne.

Related articles

What you can check to help pass a Certificate of Roadworthiness

Ringwood car service

What is wheel balancing?

Are Your Tyres Unroadworthy?

What is log book service?

Got your bearings right?